Learning to use Edinburgh Etch with Shana James

Artwork by Liz, Artwork Experiments, Uncategorized

About the etching class

For 3 Sundays in a row Shana James gave a beginners etching class hosted by PAWA (Printmakers Association of WA). We etched the copper plates with Edinburgh Etch solution.

This was my first copper plate etching - made by using hard ground and the Edinburgh Etch solution.

This was my first etched copper plate – made by using hard ground and the Edinburgh Etch solution.

As I am very much a novice print maker I learned a great deal at this class. I had been keen to learn this print method for 2 reasons. The first is that my drawings are very detailed, with very fine lines, and I wanted to reproduce that fine detail. I knew that etching would achieve that. The second is that I had read that Edinburgh Etch was a less toxic method that could be done at home.

My previous foray into etching used more hazardous chemicals and required a fume cupboard – I only did it once and decided that was not for me.

Preparing the etching plates

For the first lesson we prepared the plates – bevelled the edges, polished the surface, poured on the hard ground, waited for that to dry, and protected the back and edges. Then we drew into the hard ground, and placed the plate in the Edinburgh Etch solution for 45 minutes. Then the tape and hard ground were removed to reveal the bitten image.

This was my first print from my first etching plate prepared using Edinburgh Etch.

This was my first print from my first etching plate prepared using Edinburgh Etch.

Printing from the etched plates

The printing took place during the second lesson and I was very pleased with the result. Some of the other people in the class had a go at adding aquatint but I decided to keep it simple this time around. During this lesson we also prepared another plate so that we could draw into it at home ready for printing during lesson 3.

These lessons were aimed at beginners so we only used one colour. Shana talked about using more than one colour and registration, but what we did was quite enough for me to take in at this early stage. I also asked a lot of questions about the type of paper that is suitable for printing etchings. I need to do some homework on this to find out which papers I like best.

I know now that this method suits my style of work and will be practical for my home studio situation. I will be able to do the actual printing at the PAWA premises where they have a press for the use of members.

This is the first print from my second etching plate.

This is the first print from my second etching plate.

This is my second etched plate from the etching class with Shana James where we used Edinburgh Etch solution. July 2015.

This is my second etched plate from the etching class with Shana James where we used Edinburgh Etch solution. July 2015.

I left feeling inspired and with an extra plate to have another go at home. I’ve bought most of the things required – just a couple of bits and pieces left to find. I’ve read 5 library books about printing since the class and am part way through another!

 

2 thoughts on “Learning to use Edinburgh Etch with Shana James

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.